Learning how to clean rusty tools will keep your toolkit looking and working at its best and save you spending on new ones. Plus, it's simpler than you might think.
Although good garden tool storage will slow the process, even the best spades, secateurs, trowels, and more will deteriorate over time. 'All steel tools will rust,' says Edd at Tinker and Fix (opens in new tab). And, 'if they are used or stored in damp conditions, this process will be sped up.' However, if you keep on top of cleaning off the rust, along with your regular maintenance, then it won't have the chance of causing major issues, he says.
We've brought together a few simple ways to do it. Whatever approach you try, just remember to always wear eye protection and gloves, as advises the team at WD-40 (opens in new tab).
How to clean rusty tools manually
To start, it's a good idea to wash off any loose dirt or grease using warm water and a drop of dish soap. Then, thoroughly dry the tools before tackling the rust.
'You can use various wire brushes to physically remove rust from the surface of the tool,' says Edd.
'For general maintenance, a brass brush is great at removing light surface rust without being too aggressive to the metal itself.
'If you want to restore a very heavily corroded tool, then you might need to switch to a steel wire brush,' he continues. These are stiffer and will remove more rust from the surface to get it back to shiny metal.
Some people also use coarse sandpaper for tackling heavy rust, to the same effect. Any leftover speckles can be treated with finer-grit sandpaper – using this should reduce the risk of damaging the metal itself.
Whether you're cleaning up your best garden spade or your trusty trowel, after you've removed as much rust as possible, rinse the tool to get rid of any lingering debris. Then, ensure it's properly dry before storing it away.
How to clean rusty tools with vinegar
'You can purchase specific chemical rust treatments that stabilize rust and prevent further deterioration for a period of time,' says Edd. However, he says they are relatively expensive to use over large surface areas such as spades, and he finds them unnecessary.
'Using cleaning vinegar works well and is a much cheaper alternative,' Edd says. So, if you're looking for cheap garden ideas, this is a good approach to try.
'Cleaning vinegar can be purchased easily from a lot of refill/eco shops where it's sold as a general cleaning solution,' he continues. Alternatively, white vinegar can be bought from most supermarkets. 'It's not as acidic as cleaning vinegar so it's not as effective, but it's close,' he says.
Here are his step-by-step tips on how to do it:
- Give the tool you are looking to treat a quick clean.
- Grab a container that's large enough to allow the metal areas of the tool to be submerged in the vinegar. As Homebase (opens in new tab) advises, it's a good idea to create some form of support, so only the rusted parts of your tools are in contact with the liquid. This will prevent it from affecting any other materials, such as wooden handles. Then, it's just a case of leaving things to soak for 24 hours or so. The process is quicker in a warmer environment.
- You'll notice the metal turning from a rusty brown to a black color. Remove the tool from the vinegar, rinse it off with warm water, and then dry it before storing it away.
'This process won't get you back to shiny metal,' says Edd, 'but the rust will be removed.'
How to clean rusty tools with chemicals
Set on using an off-the-shelf product? There are many commercial rust-removal solutions that are widely available. Just ensure you follow the instructions on the label to use them, wear protective clothing, and work in a well-ventilated area.
To keep your tools sparkling, it's good to invest in a multi-purpose solution for general maintenance, too. For instance, STIHL Superclean (opens in new tab) is a resin solvent spray designed with a 2-in-1 function. 'Firstly, it dissolves resin, prevents rust, and removes dirt from your cutting blade,' explains Paul Hicks from STIHL (opens in new tab). 'And second, it provides lubrication and protection from corrosion.' It's ideal for cutting attachments, hedge trimmer blades, and chainsaws, and all you need to do is simply spray it on after use and then run the cutting tool for a brief moment.
How can you protect your tools for longer?
Once you've learned how to clean rusty tools, the next step is to protect the metal. This is key to making your tools last longer.
'A light coating of an oil, such as camellia oil or a light machine oil, will help prevent further rust forming,' says Edd. The team at WD-40 suggests using their Multi-Use Product (opens in new tab) to form a protective, water displacing layer. 'This multi-functional spray will make sure that your tools are protected from rust, grime, and the elements, so you are free to enjoy your garden without worrying about the tools in your shed,' they add.
Edd also recommends keeping your tools somewhere that's relatively dry. Paul Hicks of Stihl agrees, explaining how putting tools away while they are damp, or keeping them in a leaky shed, can lead to rust. If you need an update, our buying guide to the best sheds is a good place to start – or, perhaps you simply need to learn how to felt a shed roof to keep yours safe and dry for your tools.
How do you clean secateurs?
Once you've invested in some of the best secateurs, proper maintenance will help fight off rust and keep the blades sharp.
'If you've invested in good quality secateurs, it’s highly likely that they will be made from high carbon steel rather than stainless steel,' says Edd. 'Japanese secateurs in particular are renowned for using high carbon steel. They are incredibly sharp and can be re-sharpened – meaning they will provide you with a continuously better cut over the years in the garden.
'However, as they aren’t stainless steel, they will tarnish (from tannins in plant sap, etc.,) and form surface rust relatively easily if they are left in a damp environment.' Edd explains how this isn't a structural problem, but the surface rust will affect their ability to cut (plus it doesn't look great).
Luckily, it's easy to keep them in top condition. He shares his tips below:
- Clean your secateurs. Do this as regularly as you can to avoid the build-up of rust and reduce the risk of transferring any diseases around your garden via your secateurs. Edd recommends using Niwaki's Crean Mate (opens in new tab) – a scouring block that needs soaking in water for a few minutes before using it. 'Think of it like a mildly abrasive eraser,' he says. 'You simply rub it all over your secateurs and it will clean up their surface.' Ensure you work across all of the cutting area, he says. Most good quality secateurs have a bypass mechanism where the blade glides past the lower jaw, so you need to clean it all to keep it working well. 'Remember to keep your fingers away from the edges whilst you rub it over the cutting blades.' Then, simply wipe away the residue with a cloth to see the blade coming clean – you'll soon begin to hear the difference if you test them. Surface rust on the secateur handles can be tackled in the same way, or if you need something more abrasive, you can use some wire wool or a wire brush.
- Sharpen the blades. Edd advises using a whetstone for this task. Invest in a small one which can be easily used on secateurs rather than using a large one designed for kitchen knives. 'Find the angle of the secateur blade by resting the whetstone on top in the same direction. Then simply work the stone using small circular motions using the same consistent angle. Work over the entire blade to just put the edge back on.' Remember to turn the blade over and lightly run the whetstone over it to remove any burs from the other side, too.
- Add a protective coating. As with most metal tools, adding a protective barrier after cleaning can help them last longer. For secateurs, Edd says that camellia oil is perfect (and the preferred choice in Japan) because it isn't acidic. 'You only need a few drops onto a sponge and you simply wipe it over the secateurs. The sponge will hold the camellia oil, so keep this in your maintenance kit.' The oil will act as a surface barrier on the carbon steel, offering some protection when you next use them.
The garden was always a big part of Holly's life growing up, as was the surrounding New Forest where she lived. Her appreciation for the great outdoors has only grown since then. She's been an allotment keeper, a professional gardener, and a botanical illustrator – plants are her passion. But, she loves all things digital too. She joined the team at Gardeningetc after working as a freelance content creator for a web agency, whilst studying for her M.Sc. in Marketing. Now she feels lucky enough to combine both digital and botanical worlds, every day.
Memorial day patio furniture sales and outdoor deals – live
Outdoor Living All of the best Memorial Day patio furniture sales and grill deals live right now. As chosen by the Gardeningetc team...
By Annie Collyer • Published
Flymo EasiStore 340R Li lawn mower review: compact and easy-to-use cordless design
Garden Tools We put the Flymo EasiStore 340R Li to the test on a variety of different lawns to see if it cuts the mustard (as well as the grass!)
By Steve Bradley • Published